454 engine modifications
#3
Registered
Join Date: Jul 2009
Location: Grosse Pointe Farms, MI
Posts: 1,570
Likes: 0
Received 2 Likes
on
2 Posts
The Edlebrock marine aluminum heads are nice. You can get them in large ovals and they should work great for your application. Merlin irons are a nice option too if you're worried about salt or want to save some coin. What other mods do you have? You probably don't want anything with high CC runners, unless you plan on going pretty radical with it.
What intake are you planning on running? Single plane or dual? The Edlebrock air-gap is a nice option for a 454, if you haven't picked one yet.
Hp500EFI cam, air-gap intake, and heads should be a nice, reliable combo for your motor with your existing exh. manifolds.
What intake are you planning on running? Single plane or dual? The Edlebrock air-gap is a nice option for a 454, if you haven't picked one yet.
Hp500EFI cam, air-gap intake, and heads should be a nice, reliable combo for your motor with your existing exh. manifolds.
#5
Registered
Thread Starter
Join Date: Jul 2010
Location: Deerfield BCH, FL
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
The afr heads come with a option for cnc porting? Or is that another company? The motor has a edelbroc intake 2.0 with a 750 holly don't know which plane that is, probly a 2.
Im planning on breaking it down soon for the first time. the boat does 58mph now with a 21 pitch prop, im thinking its only a 330hp but not sure it has a mercruiser flamearrestor but who knows.
Im planning on breaking it down soon for the first time. the boat does 58mph now with a 21 pitch prop, im thinking its only a 330hp but not sure it has a mercruiser flamearrestor but who knows.
Last edited by pantera232; 12-12-2010 at 04:10 PM.