Tuning help pls
12-25-2010, 12:12 PM
#2
Is your exhaust a header pipe style or manifold?
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
12-25-2010, 03:13 PM
#4
Ron Sporl Performance
Offshoreonly Advertiser
iTrader: (1)
Join Date: Dec 2010
Location: Chalmette, LA / Bessemer, AL
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
It needs to go in the stainless riser closest to the manifold, this is double jacketed, so the best advice is to send it back to weld in the 0.2 bung. It should cost you less than 50.00!
__________________
Ron Sporl Performance 504-616-6005
Custom High Performance Marine & Racing Engines,Full In House Machine Shop,Custom Rigging & Other Performace Applications. www.ronsporlperformance.com
Ron Sporl Performance 504-616-6005
Custom High Performance Marine & Racing Engines,Full In House Machine Shop,Custom Rigging & Other Performace Applications. www.ronsporlperformance.com
12-25-2010, 09:53 PM
#5
Get a spacer plate made to go between the manifold and riser and put the sensor there. Make sure it is in far enough to be fully exposed to exhaust flow other wise the sensor will not read at high rpm.
It will work, I have a friend that did it.
Smitty
It will work, I have a friend that did it.
Smitty
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
