272 SR1 Help with gauges, cup holders quick please
01-11-2011, 09:33 PM
#1
272 SR1 Help with gauges, cup holders quick please
I have an opportunity to replace all of my gauges and cup holders really, really cheap but I need some info asap!!
The boat is shrink wrapped and my memory is failing me.
I know there are 10 gauges total in the dash but what are they and what size?
I know 2 tachs, speedo, 2 oil pressure, 2 water temp, fuel....that is 8. What am I forgetting? 2 for voltage or 1?
And what else?
Are they 3 1/3 amd 2 1/8????
Last, factory cup holders....how many and what size????
HELP HELP HELP!!!!
The boat is shrink wrapped and my memory is failing me.
I know there are 10 gauges total in the dash but what are they and what size?
I know 2 tachs, speedo, 2 oil pressure, 2 water temp, fuel....that is 8. What am I forgetting? 2 for voltage or 1?
And what else?
Are they 3 1/3 amd 2 1/8????
Last, factory cup holders....how many and what size????
HELP HELP HELP!!!!
01-11-2011, 10:10 PM
#2
Registered
Join Date: Aug 2010
Location: Sunny California!!
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
I've got a 292 SR-1 and here is what I have:
2 - 6K Tachs
1- Speedo
2 - Fuel Pressure (0-30lbs.)
4 - Water Temperature
2 - Volt/Amps
1 - Gas Gauge
I also have 1 hour meter gauge near the ignition switches.
My gauges are 2" and the speedo and tachs are 3-3/8"
Hope that helps!
2 - 6K Tachs
1- Speedo
2 - Fuel Pressure (0-30lbs.)
4 - Water Temperature
2 - Volt/Amps
1 - Gas Gauge
I also have 1 hour meter gauge near the ignition switches.
My gauges are 2" and the speedo and tachs are 3-3/8"
Hope that helps!
01-12-2011, 05:03 PM
#4
Registered
Join Date: Aug 2010
Location: Sunny California!!
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Yeah...
I thought that was weird too.
I bought the boat as a full-on complete restoration so I never had it in the water but I did run it and all four gauges registered and were working.
I never checked to see what they were monitoring as of yet!
I thought that was weird too.
I bought the boat as a full-on complete restoration so I never had it in the water but I did run it and all four gauges registered and were working.
I never checked to see what they were monitoring as of yet!
01-12-2011, 06:34 PM
#5
Registered
Join Date: Dec 2010
Location: CT
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
I have a 357 but the gauges should be the same. Just was looking at them last weekend. 3 3/8" for tach and spedo. 2 1/16" for the rest.
1 spedo
2 tachs
1 Fuel
2 volts
2 oil pressure
2 water temp
2 hour meter
There are 4 cup holders all of them are 3". 2 up front and 2 next to the back bench. Just measured them last week end.
Hope this helps.
1 spedo
2 tachs
1 Fuel
2 volts
2 oil pressure
2 water temp
2 hour meter
There are 4 cup holders all of them are 3". 2 up front and 2 next to the back bench. Just measured them last week end.
Hope this helps.
Last edited by F357; 01-13-2011 at 03:00 PM.
01-12-2011, 08:49 PM
#6
I have a 357 but the gagues should be the same. Just was looking at them last weekend. 3 3/8" for tach and spedo. 2 1/16" for the rest.
1 spedo
2 tachs
1 Fuel
2 volts
2 oil pressure
2 water temp
2 hour meter
There are 4 cup holders all of them are 3". 2 up front and 2 next to the back bench. Just measured them last week end.
Hope this helps.
1 spedo
2 tachs
1 Fuel
2 volts
2 oil pressure
2 water temp
2 hour meter
There are 4 cup holders all of them are 3". 2 up front and 2 next to the back bench. Just measured them last week end.
Hope this helps.
01-13-2011, 09:18 AM
#7
Registered
Join Date: Oct 2006
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
I have a 357 but the gagues should be the same. Just was looking at them last weekend. 3 3/8" for tach and spedo. 2 1/16" for the rest.
1 spedo
2 tachs
1 Fuel
2 volts
2 oil pressure
2 water temp
2 hour meter
There are 4 cup holders all of them are 3". 2 up front and 2 next to the back bench. Just measured them last week end.
Hope this helps.
1 spedo
2 tachs
1 Fuel
2 volts
2 oil pressure
2 water temp
2 hour meter
There are 4 cup holders all of them are 3". 2 up front and 2 next to the back bench. Just measured them last week end.
Hope this helps.
Platinum Member
01-13-2011, 02:58 PM
#9
Registered
Join Date: Dec 2010
Location: CT
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, Baja226sport I don't mean to take over you thred, I'm just lazy
Last edited by F357; 01-13-2011 at 03:01 PM.
01-14-2011, 07:46 AM
#10
Registered
Join Date: Oct 2006
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Yes i did get the free bezels with the instruments,I did buy the Hardin marine black with red bezels,i think the price was $139 a set and you have to buy 2 sets,the hour meters did not include in the sets ,but CP has them also,i will try to send a picture soon.
