Go Back  Offshoreonly.com > Technical > General Q & A
Holley help/ twin 750s/5psi boost/roots >

Holley help/ twin 750s/5psi boost/roots

Notices

Holley help/ twin 750s/5psi boost/roots

Old 05-03-2011, 02:19 PM
  #1  
Registered
Thread Starter
 
Join Date: Nov 2003
Location: Lake Travis ,Texas
Posts: 2,295
Likes: 0
Received 2 Likes on 2 Posts
Default Holley help/ twin 750s/5psi boost/roots

twin holley 750 blower carbs on a weiand 256 set at 5lbs boost
carbs are blower carbs with boost refernced power valves on the primaries
primary jetting is 74s secondary jetting is 85s
AEM wide band O2 reader/data logger
509" approx 9-1 cr stock HP500 heads with inconels and 1.8 rockers,
custom cam, more lift less duration than stock HP500 cam
runs 11.7 on prmaries = too rich
runs 12.5 on secondaries/WOT = too lean
has a dead spot at around 2000rpm were it goes scary lean
will die if you come off throttle too fast..

carbs are off now and I am cleaning and rebuilding,
power valves seem ok but I will be replacing them regardless,
wondering what PVs I should be using and which way to go on jetting and anything else you can help with..

Last edited by HTRDLNCN; 05-03-2011 at 02:25 PM.
HTRDLNCN is offline  
Old 05-05-2011, 12:43 AM
  #2  
Registered
 
Join Date: Apr 2007
Posts: 146
Likes: 0
Received 0 Likes on 0 Posts
Default

call Patrick from Pro-System
sosatime is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.