Closed helm pump: which one to get?
#1
Registered
Thread Starter
Closed helm pump: which one to get?
It seems impossible to find a proper power steering pump for my motors (or a lot of$$$$). And am thinking that it may be cheaper and easier to just get a closed helm pump.
There's sooo many different makes and models out there and have no idea which one to get. Any ideas?
I'm running 502 MPIs and TRS outdrives. Need wing plates, but have rams and hoses are already run in the boat.
I will even trade too! I have an IMCO Helm with tilt, full hydraulic but needs a pump...Would trade this for a closed helm and some wing plates.
HELP!
There's sooo many different makes and models out there and have no idea which one to get. Any ideas?
I'm running 502 MPIs and TRS outdrives. Need wing plates, but have rams and hoses are already run in the boat.
I will even trade too! I have an IMCO Helm with tilt, full hydraulic but needs a pump...Would trade this for a closed helm and some wing plates.
HELP!
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
What is the ID of the cylinders? Most likley you will wind up with a lot of turns lock to lock. I have always liked the Capilano helms.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#8
Registered
iTrader: (4)
I have a good Hynautic H21 and an H25 that needs to be rebuilt. I will let them both go for $150+ship
http://www.offshoreonly.com/forums/s...helm-pump.html
http://www.go2marine.com/product.do?no=81264F
http://www.offshoreonly.com/forums/s...helm-pump.html
http://www.go2marine.com/product.do?no=81264F