wtb conversion stuff for mpi to carb
05-23-2011, 06:21 AM
#2
Registered
Have a factory bronze lined alum intake and a marine HEI dist, fuel pump and regulator, not sure I want to get rid of the carb at this time..Rob [email protected] 540-786-8111
05-23-2011, 03:18 PM
#3
artselectricinc.com
Platinum Member
I have two complete stock set ups. They came off a 1995 502 carbed, that I converted to MPI.The carbs are old, but worked fine when I removed them a few years ago. That being said, I would not use them without a thorough cleaning and kit. Includes intakes, carbs, and flame arrestors.
I'm pretty sure you can use the existing distributor with the carbs. Just unplug the computer pigtail and it will work with a default setting.
Steve
I'm pretty sure you can use the existing distributor with the carbs. Just unplug the computer pigtail and it will work with a default setting.
Steve
