SS Raw Water Pump
#1
Registered
Thread Starter
SS Raw Water Pump
http://www.hardin-marine.com/p-14544...rhaul-kit.aspx
Thinking about this part.
What's the verdict?
The stainless front plate on mine is always good. The rear surface of my plastic housing is always chewed up. The vane surface stays OK. Tired of buying the bodies.
Thinking about this part.
What's the verdict?
The stainless front plate on mine is always good. The rear surface of my plastic housing is always chewed up. The vane surface stays OK. Tired of buying the bodies.
#2
Gold Member
Gold Member
#3
Registered
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Also, looks like GLM is replicating Jabsco's brass pumps, including just the brass housing replacement.
http://www.glmmarine.com/product-WaterPumps.html
Last edited by handfulz28; 05-23-2011 at 04:47 PM.
#4
Registered
Join Date: Dec 2007
Location: Detroit River/ lake Erie
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
http://www.hardin-marine.com/p-14544...rhaul-kit.aspx
Thinking about this part.
What's the verdict?
The stainless front plate on mine is always good. The rear surface of my plastic housing is always chewed up. The vane surface stays OK. Tired of buying the bodies.
Thinking about this part.
What's the verdict?
The stainless front plate on mine is always good. The rear surface of my plastic housing is always chewed up. The vane surface stays OK. Tired of buying the bodies.
#5
Registered
Join Date: Aug 2007
Location: Greensboro,NC
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
I am running one with no complaints. There is a metal insert so the housing does not get damaged or worn that can be replaced. I heard they wear out impellers faster, but I replace mine every year. Jeff Wurl