Go Back  Offshoreonly.com > Technical > Do It Yourself, Boating on a Budget
Oil leaking out of starboard exhaust >

Oil leaking out of starboard exhaust

Notices

Oil leaking out of starboard exhaust

Thread Tools
 
Old 06-15-2011, 04:03 PM
  #1  
Registered
Thread Starter
 
Join Date: Feb 2011
Location: LAKE LIVINGSTON TEXAS
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Default Oil leaking out of starboard exhaust

Friend has an older baja that is leaking what looks like oil out of the starboard thru hull exhaust. When hooked up to a hose and idling, no apparent oil is coming out, which tells me its a very minute leak. However, after running it on the lake or at the house, he gets a oily dripping stain from the exhaust...several different issues I'm sure it could be, but was unable to google or yahoo this exact problem specifically...only searches of water getting in the oil, not oil getting in the exhaust after letting the boat sit.

He knows he can take it to the nearest certified mechanic...blah blah blah...just trying to do a bit of problem specific research before hand. Thanks.

Last edited by jctexas07; 06-15-2011 at 04:05 PM. Reason: bad engrish
jctexas07 is offline  
Old 06-15-2011, 04:29 PM
  #2  
Registered
 
Airpacker's Avatar
 
Join Date: Aug 2001
Location: Aurora Ontario
Posts: 4,008
Likes: 0
Received 3 Likes on 3 Posts
Default

could be valve guide seals on exhaust valves leaking.
Airpacker is offline  
Old 06-15-2011, 04:37 PM
  #3  
Registered
 
Expensive Date's Avatar
 
Join Date: May 2006
Location: West Creek NJ
Posts: 4,227
Received 1 Like on 1 Post
Default

Does the motor have an oil cooler?.If so that would be my first guess.
Expensive Date is offline  
Old 06-15-2011, 07:33 PM
  #4  
Registered
Thread Starter
 
Join Date: Feb 2011
Location: LAKE LIVINGSTON TEXAS
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Default

No oil cooler. It is a mid to lower 90's 350 chevy motor. It just started doing this during the last month. Not too familiar with the valve theory...could you elaborate a bit on it?
jctexas07 is offline  
Old 06-15-2011, 09:06 PM
  #5  
Registered
iTrader: (7)
 
Join Date: Feb 2009
Location: NW Michigan
Posts: 8,302
Received 1,493 Likes on 807 Posts
Default

Make sure your oil isn't milky which it doesn't sound like it is. I would say a bad valve seal or seals. At idle you don't get a lot of oil on the top end however running higher rpms also increases pressure and pumps much more up top. Pull the valve cover off the side your getting the leak and see what's going on. If you have the ability to pull the springs on that side do that also to see if you have the correct stem/guide clearance.
getrdunn is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.