manifolds???
#1
Registered
Platinum Member
Thread Starter
Join Date: Jun 2011
Location: Regina,sk,canada
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
manifolds???
anyone know what manifolds these are? they have no markings in them, there light, and the exit to the riser is round.
I need risers for silent choice and would like to know which ones to order.
I need risers for silent choice and would like to know which ones to order.
#4
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
yes but you will need to worrie about reversion whicj gil;s are known to have a problem with..need to know the cam specs first before you change them..the longer the tube and the further back in the tube where the water blends with the exhaust the less chance of reversion..
this is what you need if you choose to go with the silent choice..
http://www.offshoreonly.com/forums/s...il-risers.html
this is what you need if you choose to go with the silent choice..
http://www.offshoreonly.com/forums/s...il-risers.html
#6
Registered
Platinum Member
Thread Starter
Join Date: Jun 2011
Location: Regina,sk,canada
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
thanks for youre help, motors are unknown specs was told they were 500 hp 454's i paid 5 grand for the pair. im gonna pull the other one apart and figure out what there all about. my email is [email protected]
Last edited by zeke; 07-03-2011 at 09:53 AM.