o2 sensor
#1
Registered
Thread Starter
Join Date: Dec 2009
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
o2 sensor
I would like to know if anyone makes a kit to put an o2 sensor in my emi thunder exhaust. I want to get my boat tuned perfectly and am told this is the route to go. Thanks for your help.. Winkman
#4
VIP Member
VIP Member
You can weld bungs in yourself, the tricky part will be drilling through double wall Ss without the bit grabbing. If you can do use a mill or CNC you will be happier
look for O2 sensor (digital) airfuelspark.com simple to use and all in one package
look for O2 sensor (digital) airfuelspark.com simple to use and all in one package
#7
Registered
Join Date: Aug 2009
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
http://www.innovatemotorsports.com/products.php
pretty happy with the lm-2 if you get the inductive clamp you can map to rpm for your application ( i think)
pretty happy with the lm-2 if you get the inductive clamp you can map to rpm for your application ( i think)
#9
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
I had this idea for years,,if its a big block and if its a hp style manifold you could remove the intake and drill and tao the center where the exhaust port would between the 2 center intake ports..it will only regesture the 2 center cylinders but its still exhaust gasses that you need to read..
#10
Registered
Join Date: Jul 2009
Location: west of chitown, il
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
Love that idea Fixx! That way you can run without the worry of water killing the sensor. Have you ever tried that? Is there enough gasses flowing through there to register good readings, I wonder.