39" RC Fountain
#1
Registered
Thread Starter
Join Date: Oct 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
39" RC Fountain
Hello,
I' m building a Fountain semi scale RC offshore, hull is carbon/kevlar. I show you the hull and hardware, when the boat will be finished speed should be 120 km/h:
I can talk to you about technical specs. Brushless motor is water cooled and gives 35000 RPM unload with high torque, speed controller is water cooled too and can deliver 200 Amps on 22.2 Volts. I use Lithium Polymer batteries.
I use a 3/16" flexshaft, metal propellers are sharpened and balanced.
Two rudders with water inlets is better for stability at high speed.
I won' t paint the hull, gelcoat is very clean.
May be you can help me I need stickers, racing offshore stickers to make a nice looking boat, hull is 39"/1 meter long.
If you can do that for my project, that' s very nice
I will send you my adress, thank you very much for your help
I' m building a Fountain semi scale RC offshore, hull is carbon/kevlar. I show you the hull and hardware, when the boat will be finished speed should be 120 km/h:
I can talk to you about technical specs. Brushless motor is water cooled and gives 35000 RPM unload with high torque, speed controller is water cooled too and can deliver 200 Amps on 22.2 Volts. I use Lithium Polymer batteries.
I use a 3/16" flexshaft, metal propellers are sharpened and balanced.
Two rudders with water inlets is better for stability at high speed.
I won' t paint the hull, gelcoat is very clean.
May be you can help me I need stickers, racing offshore stickers to make a nice looking boat, hull is 39"/1 meter long.
If you can do that for my project, that' s very nice
I will send you my adress, thank you very much for your help
#4
Registered
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
Well the Mamba Monster ESC I use in my HPI Savage Flux puts out 120Ah continues, so 200Ah peak should be possible. So there might be some of the watercooled ESC's that might be able to deliver 200Ah cont. You never get too old for this stuff
Last edited by A.O. Razor; 10-22-2011 at 08:33 PM.
#6
Gold Member
Gold Member
iTrader: (4)
Join Date: Jan 2011
Location: Omaha Ne
Posts: 1,482
Likes: 0
Received 0 Likes
on
0 Posts
With Fountian being such an uproar these days I would find a boat you like the graphics on & take digital pictures & go to a graphics shop should be no problem, solong as the boat owner is cool with it. I have a 45" model gas powered that I am going to do the same thing then Ill haveParty Gras & Mini Gras
#7
Registered
Thread Starter
Join Date: Oct 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
The hull is made by MHZ, here is a link to USA website
http://www.mhzusa.com/Kiton-m-1748.htm
Yes I use waterproof and watercooling esc, 180A continious and 360A peak.
Is it possible to have cool offshore stickers?
http://www.mhzusa.com/Kiton-m-1748.htm
Yes I use waterproof and watercooling esc, 180A continious and 360A peak.
Is it possible to have cool offshore stickers?
Last edited by Perrier; 10-23-2011 at 05:42 AM.
#8
Registered
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
With Fountian being such an uproar these days I would find a boat you like the graphics on & take digital pictures & go to a graphics shop should be no problem, solong as the boat owner is cool with it. I have a 45" model gas powered that I am going to do the same thing then Ill haveParty Gras & Mini Gras
Eeh?
#9
Registered
Gold Member
That thing is cool!!! I have a 36" traxxas spartan with a castle creations motor in it that runs about about 55 mph on 6s lipo power. But the fact that yours is a replica of a real boat is just to cool for school!!! I want one lol
#10
Registered
Join Date: Jul 2009
Location: west of chitown, il
Posts: 461
Likes: 0
Received 0 Likes
on
0 Posts
If you guys want a real cool, fast, and easy to setup BIG r/c boat, check these guys out.
http://www.whhonline.com/ProductDeta...ctCode=ENF250K
My personal fav is the MAGNUM 57 in white. Proven power and LOTS of upgrade possibilities. I don't sell these, but have owned a few over the years. If you want a big money boat, The link that Piere posted to MHZ USA has some trick gear. They offer huge boats with real Speedmaster#6 dual drive setups with dual inline motor setups. See here
http://mhzusa.com/images/XXX-Muscle%20083.jpg
http://www.whhonline.com/ProductDeta...ctCode=ENF250K
My personal fav is the MAGNUM 57 in white. Proven power and LOTS of upgrade possibilities. I don't sell these, but have owned a few over the years. If you want a big money boat, The link that Piere posted to MHZ USA has some trick gear. They offer huge boats with real Speedmaster#6 dual drive setups with dual inline motor setups. See here
http://mhzusa.com/images/XXX-Muscle%20083.jpg