Marine marks custom crap
#1
Registered
Thread Starter
Join Date: Mar 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Marine marks custom crap
Beware of Marine Marks custom panels. They use a poor quality material and charge you full price. We ordered over 500$ worth of panels and the color in the printed material looked like it came off a cheap home printer, and they put a thick coat of acrylic over it. The color was way off, and they messed up the wording. Just an overall poor job. It was impossible to get someone to call us back. The customer service was HORRIBLE. I would not recommend them to paint my toenails then alone touch anyones boat.
Even after complaints were made, we still did not receive any refund. They remade the panels, and they looked just as bad.
I don't care if anyone has had good service from them, our service and product were so terrible, and again we did not get our money back! It is not a cheap risk and your odds are better to just go to the casino and blow your money.
Be advised you have been warned.
Sincerely,
SAD
Even after complaints were made, we still did not receive any refund. They remade the panels, and they looked just as bad.
I don't care if anyone has had good service from them, our service and product were so terrible, and again we did not get our money back! It is not a cheap risk and your odds are better to just go to the casino and blow your money.
Be advised you have been warned.
Sincerely,
SAD
#2
OSO Moderator
Charter Member
This was EXACTLY the same case for my friend trying to get some Donzi panels done.
In short - Marine Marks SUCKS!
In short - Marine Marks SUCKS!
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
#3
Registered
iTrader: (5)
Beware of Marine Marks custom panels. They use a poor quality material and charge you full price. We ordered over 500$ worth of panels and the color in the printed material looked like it came off a cheap home printer, and they put a thick coat of acrylic over it. The color was way off, and they messed up the wording. Just an overall poor job. It was impossible to get someone to call us back. The customer service was HORRIBLE. I would not recommend them to paint my toenails then alone touch anyones boat.
Even after complaints were made, we still did not receive any refund. They remade the panels, and they looked just as bad.
I don't care if anyone has had good service from them, our service and product were so terrible, and again we did not get our money back! It is not a cheap risk and your odds are better to just go to the casino and blow your money.
Be advised you have been warned.
Sincerely,
SAD
Even after complaints were made, we still did not receive any refund. They remade the panels, and they looked just as bad.
I don't care if anyone has had good service from them, our service and product were so terrible, and again we did not get our money back! It is not a cheap risk and your odds are better to just go to the casino and blow your money.
Be advised you have been warned.
Sincerely,
SAD
Last edited by ridefast77; 03-12-2012 at 09:10 AM.
#4
Registered
iTrader: (28)
Agreed...Marine Marks Sucks!!!
I had the same experience last year getting panels made for my at the time Formula 272. I talked with them on the phone and was assured that they had a fast turn around time and that they made quality products......
Well, I spent about $500 as well on "custom" carbon fiber panels. First problem was the 10 day turn around took 9 weeks. And they would not return calls or emails and would not ship my old panels back that I had to send them as templates so I could not use my boat.
Next, the carbon fiber was cheap printing on the back of acrylic and it was such a horrible distorted image that I did not even want to use it. I complained, was told I would be refunded and also that replacements would be made. Neither happened.
Not to mention that the new panels did not fit properly and I had to drill new holes in them as well as trim them.
Overall....poor product, poor service, and a bunch of BS to go with it.
I would never ever recommend them to anyone ever!!!!!
Well, I spent about $500 as well on "custom" carbon fiber panels. First problem was the 10 day turn around took 9 weeks. And they would not return calls or emails and would not ship my old panels back that I had to send them as templates so I could not use my boat.
Next, the carbon fiber was cheap printing on the back of acrylic and it was such a horrible distorted image that I did not even want to use it. I complained, was told I would be refunded and also that replacements would be made. Neither happened.
Not to mention that the new panels did not fit properly and I had to drill new holes in them as well as trim them.
Overall....poor product, poor service, and a bunch of BS to go with it.
I would never ever recommend them to anyone ever!!!!!
#5
Registered
Join Date: Dec 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Beware Of Seller
Sent template to ensure dash panel would be correct. First dash panel that was shipped was wrong. Second panel was so poorly packaged that it was broke in many pieces. Now they don't answer the phone and it has been over 2 months and still no dash panel. Please BEWARE!!!!!!
#6
Registered
iTrader: (28)
Sent template to ensure dash panel would be correct. First dash panel that was shipped was wrong. Second panel was so poorly packaged that it was broke in many pieces. Now they don't answer the phone and it has been over 2 months and still no dash panel. Please BEWARE!!!!!!
The only way I got them in gear was that I had luckily paid through paypal. I opened a claim and when paypal took their money back from them they were instantly in a hurry to take care of me.
The stuff was still junk though!
#7
Registered
Join Date: Dec 2012
Location: MALTA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Scammed by marinemarks - help needed!!
Have also been scammed by MarineMarks:
Sent them original templates on 12/17/2012 and they confirmed to have received them,
No replies from them since 01/18/2013
Sent them TONS of E-mails................. NO REPLY
Called them a MILLION times................NO REPLY (except for answering machine..)
I am now left without the ORIGINAL TEMPLATE and its quite an issue to get new ones (Boat is from 1995)
DOES ANYONE ON OSO KNOW SOMEBODY WHO CAN GO TO THEIR WORKSHOP AND TRY TO COLLECT THE ITEMS WHICH I SHIPPED TO THEM?????
Address is:
16208 Lone Cabin Dr, Chesterfield, MO 63005-6628
I CAN OFFER GOOD COMPENSATION FOR THIS JOB.
Thanks for your invaluable help!!!
Sent them original templates on 12/17/2012 and they confirmed to have received them,
No replies from them since 01/18/2013
Sent them TONS of E-mails................. NO REPLY
Called them a MILLION times................NO REPLY (except for answering machine..)
I am now left without the ORIGINAL TEMPLATE and its quite an issue to get new ones (Boat is from 1995)
DOES ANYONE ON OSO KNOW SOMEBODY WHO CAN GO TO THEIR WORKSHOP AND TRY TO COLLECT THE ITEMS WHICH I SHIPPED TO THEM?????
Address is:
16208 Lone Cabin Dr, Chesterfield, MO 63005-6628
I CAN OFFER GOOD COMPENSATION FOR THIS JOB.
Thanks for your invaluable help!!!
#8
Banned
iTrader: (1)
Have also been scammed by MarineMarks:
Sent them original templates on 12/17/2012 and they confirmed to have received them,
No replies from them since 01/18/2013
Sent them TONS of E-mails................. NO REPLY
Called them a MILLION times................NO REPLY (except for answering machine..)
I am now left without the ORIGINAL TEMPLATE and its quite an issue to get new ones (Boat is from 1995)
DOES ANYONE ON OSO KNOW SOMEBODY WHO CAN GO TO THEIR WORKSHOP AND TRY TO COLLECT THE ITEMS WHICH I SHIPPED TO THEM?????
Address is:
16208 Lone Cabin Dr, Chesterfield, MO 63005-6628
I CAN OFFER GOOD COMPENSATION FOR THIS JOB.
Thanks for your invaluable help!!!
Sent them original templates on 12/17/2012 and they confirmed to have received them,
No replies from them since 01/18/2013
Sent them TONS of E-mails................. NO REPLY
Called them a MILLION times................NO REPLY (except for answering machine..)
I am now left without the ORIGINAL TEMPLATE and its quite an issue to get new ones (Boat is from 1995)
DOES ANYONE ON OSO KNOW SOMEBODY WHO CAN GO TO THEIR WORKSHOP AND TRY TO COLLECT THE ITEMS WHICH I SHIPPED TO THEM?????
Address is:
16208 Lone Cabin Dr, Chesterfield, MO 63005-6628
I CAN OFFER GOOD COMPENSATION FOR THIS JOB.
Thanks for your invaluable help!!!
I sure hope so.......!!!!!!!!!! Come on OSO!!!
#9
Registered
VIP Member
iTrader: (8)
Join Date: Sep 2006
Location: CapeComa,FL
Posts: 1,391
Likes: 0
Received 0 Likes
on
0 Posts
Sick of this
Guys....
Send me your sheet. Done. Period.
Tell me what you want for substrate, and I'll give you tons of options on design....not cad, not photoshop.....actual layout on your substrate choice.
THEN......AND ONLY THEN....will you send me money for materials. Substrate is cheap......unless you want it made out of virgin twenty something vagina....then we need a deposit......
Graphics? You design them and send the file. Pattern or hydro dip, got it under control from this side. I give options, you make a decision.
Easy.
For nothing more than the chance to help a fellow oso'er, I made a panel for iculookin.....ask him in pm or public....he can tell u first hand if I suck....
If you like, shipping paid by you.....I will send your originals prior to new panel completion....or wait....does not matter to me....
Don't have a website, don't have a fax, but I have a phone that is in my pocket when I am awake......and I answer or call back right away.
This is not what I do for a living, so I am not advertising without paying. For me, this is a hobby. Without sounding arrogant, I am among the top 10 premier "custom" fabricators in the US. If need be, I can give you what I think are the other 9.....and we are the elite creating cars and other visions for major manufacturers seen at ces, sema, and magazine teasers (concepts) globally.
Should this be an expensive proposition? Yes.
Will it be? No. Again.....it's a hobby now. I make my money renting houses and boats.....I make my mind rest by fabricating custom stuff for boats and boats only. Too old to deal with cars and fantasies...and the companies that come with those projects.
Try me, don't.....but if you do.....tell your oso brothers and sisters.
Look in restorations and upgrades for iculookins panel fab
Send me your sheet. Done. Period.
Tell me what you want for substrate, and I'll give you tons of options on design....not cad, not photoshop.....actual layout on your substrate choice.
THEN......AND ONLY THEN....will you send me money for materials. Substrate is cheap......unless you want it made out of virgin twenty something vagina....then we need a deposit......
Graphics? You design them and send the file. Pattern or hydro dip, got it under control from this side. I give options, you make a decision.
Easy.
For nothing more than the chance to help a fellow oso'er, I made a panel for iculookin.....ask him in pm or public....he can tell u first hand if I suck....
If you like, shipping paid by you.....I will send your originals prior to new panel completion....or wait....does not matter to me....
Don't have a website, don't have a fax, but I have a phone that is in my pocket when I am awake......and I answer or call back right away.
This is not what I do for a living, so I am not advertising without paying. For me, this is a hobby. Without sounding arrogant, I am among the top 10 premier "custom" fabricators in the US. If need be, I can give you what I think are the other 9.....and we are the elite creating cars and other visions for major manufacturers seen at ces, sema, and magazine teasers (concepts) globally.
Should this be an expensive proposition? Yes.
Will it be? No. Again.....it's a hobby now. I make my money renting houses and boats.....I make my mind rest by fabricating custom stuff for boats and boats only. Too old to deal with cars and fantasies...and the companies that come with those projects.
Try me, don't.....but if you do.....tell your oso brothers and sisters.
Look in restorations and upgrades for iculookins panel fab
#10
Banned
iTrader: (1)
Have also been scammed by MarineMarks:
Sent them original templates on 12/17/2012 and they confirmed to have received them,
No replies from them since 01/18/2013
Sent them TONS of E-mails................. NO REPLY
Called them a MILLION times................NO REPLY (except for answering machine..)
I am now left without the ORIGINAL TEMPLATE and its quite an issue to get new ones (Boat is from 1995)
DOES ANYONE ON OSO KNOW SOMEBODY WHO CAN GO TO THEIR WORKSHOP AND TRY TO COLLECT THE ITEMS WHICH I SHIPPED TO THEM?????
Address is:
16208 Lone Cabin Dr, Chesterfield, MO 63005-6628
I CAN OFFER GOOD COMPENSATION FOR THIS JOB.
Thanks for your invaluable help!!!
Sent them original templates on 12/17/2012 and they confirmed to have received them,
No replies from them since 01/18/2013
Sent them TONS of E-mails................. NO REPLY
Called them a MILLION times................NO REPLY (except for answering machine..)
I am now left without the ORIGINAL TEMPLATE and its quite an issue to get new ones (Boat is from 1995)
DOES ANYONE ON OSO KNOW SOMEBODY WHO CAN GO TO THEIR WORKSHOP AND TRY TO COLLECT THE ITEMS WHICH I SHIPPED TO THEM?????
Address is:
16208 Lone Cabin Dr, Chesterfield, MO 63005-6628
I CAN OFFER GOOD COMPENSATION FOR THIS JOB.
Thanks for your invaluable help!!!
TTT!!!
Thanks CommanderSander.......but this guy had his panels basically stolen from him by MarineMarks and needs his panels back.