Trs u-joints
#1
Registered
Thread Starter
Join Date: May 2009
Location: Conroe, TX
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Trs u-joints
Thanks to bob at marine kinetics and the guys at dart and afr I have a problem with holding my final drives together. It
Seems that the universal joint yoke - trans side - is far too delicate for the hp and torque my mouse motors are putting out.
Did anyone ever make a beefed up joint for trs/merctrans?
I don't mind breaking the yoke so much but each time it let's go I lose the gimbal housing
Konrads are the solution but not in budget right now
And yea I know the problem is my right hand!!
M
Seems that the universal joint yoke - trans side - is far too delicate for the hp and torque my mouse motors are putting out.
Did anyone ever make a beefed up joint for trs/merctrans?
I don't mind breaking the yoke so much but each time it let's go I lose the gimbal housing
Konrads are the solution but not in budget right now
And yea I know the problem is my right hand!!
M