Need some 502's
#1
Need some 502's
Hey guys,
I need a new set of 502's and was wondering if anyone knows where I can get some from.
The 502's I have are gen v and i am looking for an engine that will slip in and connect to the fuel pump, fuel injector, wiring etc..
Any help would be much appreciated.
Thx!
I need a new set of 502's and was wondering if anyone knows where I can get some from.
The 502's I have are gen v and i am looking for an engine that will slip in and connect to the fuel pump, fuel injector, wiring etc..
Any help would be much appreciated.
Thx!
#2
Platinum Member
Platinum Member
iTrader: (6)
I may have two, debating on selling them complete or useing them to build 540's, I guess it comes down to what I can get out of them.
they are 2000 MPI model 502's 415 HP
PM me if ur interested
they are 2000 MPI model 502's 415 HP
PM me if ur interested
#4
Registered
#5
Platinum Member
Platinum Member
iTrader: (6)
#6
#7
Registered
iTrader: (1)
http://www.1800runsnew.com/NLM/newbase-NLM.html
Great people to work with. Most all new GEN VI come with a fuel pump boss. There is no fuel pump lobe on the cam to run them.
I purchased 2 brand new and took them apart. I had RMBUILDER Bob Mandra grind cams for me. They all come with fuel pump lobes so I did not have to run electric.
Everything you have on a Gen V will bolt up.
Good luck
Exact same engine as CPPERFORMANCE sells.
Great people to work with. Most all new GEN VI come with a fuel pump boss. There is no fuel pump lobe on the cam to run them.
I purchased 2 brand new and took them apart. I had RMBUILDER Bob Mandra grind cams for me. They all come with fuel pump lobes so I did not have to run electric.
Everything you have on a Gen V will bolt up.
Good luck
Exact same engine as CPPERFORMANCE sells.
Last edited by 1BIGJIM; 09-28-2012 at 07:24 AM.
#8
Thanks guys! Where i live its just so hard to find someone that can actually work on these motors.
I know this sounds a bit newbie, but if i get a long block 502, what will i need to pull of my old motor and connect to the new one?
Flywheel, pully's belts?
Fuel injector?
Water pump?
I hope the list isnt too long otherwise im going to need to fly one of you out here to help me on it!
I know this sounds a bit newbie, but if i get a long block 502, what will i need to pull of my old motor and connect to the new one?
Flywheel, pully's belts?
Fuel injector?
Water pump?
I hope the list isnt too long otherwise im going to need to fly one of you out here to help me on it!
#9
Registered
Join Date: Aug 2006
Location: Huntington NY
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
1800 runs new engine 4600 rpm
I bought a 1800 runs new 502 engine but it has less power than the other motor a merc 502 I called they said its the same but its not the same,It runs 200 less rpm .I saw this online basic power sold at one time this 502 a 4600 rpm 502.BASE MARINE ENGINES
GM V8 8.2 L
502 CID
425 Horsepower V8 Marine Base Engine
Displacement 8.2L (502 cid)
Cylinders V8
Propshaft HP 425 (317 kw)
Operating RPM 4300-4600 rpm
Bore 4.47 in.
Stroke 4.00 in.
Compression 8.75:1
Engine Rotation Left & Right Hand
pdficon.gif (224 bytes) GM's 8.2L sheet
requires Adobe® Acrobat®
getacro.gif (712 bytes)
GM V8 8.2 L
502 CID
425 Horsepower V8 Marine Base Engine
Displacement 8.2L (502 cid)
Cylinders V8
Propshaft HP 425 (317 kw)
Operating RPM 4300-4600 rpm
Bore 4.47 in.
Stroke 4.00 in.
Compression 8.75:1
Engine Rotation Left & Right Hand
pdficon.gif (224 bytes) GM's 8.2L sheet
requires Adobe® Acrobat®
getacro.gif (712 bytes)