Mercury 525 EFI Adapter Harness
#1
Registered
Thread Starter
Join Date: Oct 2011
Location: Ontario
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Mercury 525 EFI Adapter Harness
Getting ready to install a 2004 525 EFI with a 10 pin harness into a 2007 boat where a 6.2 MPI non DTS was equipped with a 14 pin harness.
Since I only have analog gauges, can I just buy the correct female 14 pin to male 10 pin adapter harness to make this work or is there more to it.
I was hoping that maybe the Mercury adapter harness 84-892444T02 might be all I need but am not sure.
Any help would be appreciated
Thanks
Since I only have analog gauges, can I just buy the correct female 14 pin to male 10 pin adapter harness to make this work or is there more to it.
I was hoping that maybe the Mercury adapter harness 84-892444T02 might be all I need but am not sure.
Any help would be appreciated
Thanks