Fountain K Plane Trim Solenoids
05-15-2013, 04:20 PM
#1
Fountain K Plane Trim Solenoids
Local Merc dealer doesn't have the White Rogers K Plane solenoids that I need. They're pushing the Merc equivalent.
Current setup has solenoid grounding through base. Merc solenoid grounds through a terminal. I don't see any issue with modifying my harness connections. But...
I've read just about every thread on every site about these solenoids, but I don't see any retrofit information - Any issues that I'm not seeing with this retrofit?
Thanks.
Current setup has solenoid grounding through base. Merc solenoid grounds through a terminal. I don't see any issue with modifying my harness connections. But...
I've read just about every thread on every site about these solenoids, but I don't see any retrofit information - Any issues that I'm not seeing with this retrofit?
Thanks.
05-15-2013, 08:09 PM
#2
Charter Member
Just run the grounding wire to the grounding terminal instead of the mounting bolt. Or go to AutoZone and pic up the same as you have for $10 if you prefer. Nothing special about these. Just a big ol relay.
That one kinda looks just like the Stinger ones I used on my stereo amps. Main difference is 3/4 terminal and if you need a constant or intermittent power solenoid. I'm assuming an intermittent is what required.
That one kinda looks just like the Stinger ones I used on my stereo amps. Main difference is 3/4 terminal and if you need a constant or intermittent power solenoid. I'm assuming an intermittent is what required.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
