Oil Pick Up Part # for 454 gen IV mag (have the melling oil pump already) Thx
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Jul 2012
Location: Delaware
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Oil Pick Up Part # for 454 gen IV mag (have the melling oil pump already) Thx
So the one part I did not get advice from on here is a new oil pick up. 454 magnum gen IV stock with a melling M77 oil pump. Just went to set the pick up I bought and it is obviously the wrong one (melling 305s). Would anyone happen to know the correct number for my application? Thanks!
#2
If everything is stock, including the oil pan, this is what you need:
Melling 241S Melling Select Oil Pumps & Pickups
Make sure you set the pickup-to-pan clearance correctly (around 3/8 inch), and best practice is to braze the pickup to the pump body with the cover and gears removed. Be careful about applying too much heat all at once - braze it a little at a time if possible. It is possible to warp the housing.
Melling 241S Melling Select Oil Pumps & Pickups
Make sure you set the pickup-to-pan clearance correctly (around 3/8 inch), and best practice is to braze the pickup to the pump body with the cover and gears removed. Be careful about applying too much heat all at once - braze it a little at a time if possible. It is possible to warp the housing.