sea water pump hose connection
06-10-2013, 07:56 PM
#1
Platinum Member
Platinum MemberThread Starter
iTrader: (5)
Join Date: May 2001
Location: NO WHERE
Posts: 3,358
Likes: 0
Received 0 Likes
on
0 Posts
sea water pump hose connection
the intake part of the housing goes to lh out correct? and the exit to rh out? on a normal rotation bb gm
06-10-2013, 10:34 PM
#4
Registered
You would think they would just put a simple "in" and "out" on the housing. Guess you have to be an engineer to understand.
Gold Member
06-11-2013, 08:57 AM
#7
Registered
Im not mechanically sound enough to know the rotations, so i just remembered the lower is to water, the upper is to engine. engine sits above the water.
if i ever roll my boat, ill reverse the hoses.
if i ever roll my boat, ill reverse the hoses.
06-11-2013, 01:02 PM
#10
Registered
I believe my bottom hose is attached to the oil cooler, top hose is attached to the drive pick-up. I hope that's right, I ran it that way last weekend....... 
96 502 efi.
Do you even get water out of the exhaust if the hoses were to be hooked up backwards? I was solid at 160 degree water temps all day. Now i'm going to be thinking about this until I get home to look at it. Dang it!
96 502 efi.Do you even get water out of the exhaust if the hoses were to be hooked up backwards? I was solid at 160 degree water temps all day. Now i'm going to be thinking about this until I get home to look at it. Dang it!
Last edited by cloudmaster_321; 06-11-2013 at 01:11 PM.
