Block Pressure zero?
08-07-2013, 04:29 PM
#1
Registered
Thread Starter
Join Date: Aug 2010
Location: Kingsville, MD
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Block Pressure zero?
Trying to find 2beeps/sec problem. 496 HO. Scan shows pitot active. I understand this is normal? Scrolling thru data shows block press zero. Is this normal? What should the range be? Where is the sensor?
Last edited by miwettig; 08-07-2013 at 04:58 PM.
08-07-2013, 08:12 PM
#3
Registered
On my 2002 496 the sensor is on the sea pump, starboard side, bottom front. You can see it just behind the fuel filter.
08-08-2013, 08:36 AM
#6
Registered
Thread Starter
Join Date: Aug 2010
Location: Kingsville, MD
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Mine are 2005. Part no.8M600023 is on the power steering cooler. Is that it? Is it looking at a 'blockage' or something to do with the block?
Last edited by miwettig; 08-08-2013 at 08:44 AM.
