Mcleod bolster seat ram bent, not working right.
#1
Registered
Thread Starter
Join Date: Sep 2010
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Mcleod bolster seat ram bent, not working right.
have a bent ram on a mcleod hydraulic bolster seat. All the stainless hardware was bent also but repaired that. It still works but not very well, it binds a bit when lowering or raising. Any chance on getting the pump rebuilt with a new ram or can you get repalcements somewhere?
#3
Charter Member # 55
Charter Member
Contact Mcleod http://www.mcleoddesign.com/index.shtml
or do a google search of the part numbers on the actuator.
or do a google search of the part numbers on the actuator.
#4
Registered
Thread Starter
Join Date: Sep 2010
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
I dont have access to the boat until spring. I have all the parts out except for the ram/motor. Not sure how it came out, wasnt much room inside the seat to get at it. Ill get in touch with mcloed and see. Might be able to get something from Fountain parts dept even.
#5
Registered
Join Date: Apr 2013
Location: Algonac, MI
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I sent you a PM.