Scratched CMI polished Sport Tubes
#1
Platinum Member
Platinum Member
Thread Starter
Scratched CMI polished Sport Tubes
Woops....small dent and scratches on top of my Sport Tubes. It should be good if I can get the scratches out. Is their a DYI process besides sending it back to CMI?
Ben
Ben
#4
Some good stainless polishing compound might be worth a try if they are just minor abrasions. If deeper, you will probably have to wet sand with some 600, then 1000, then 1200 and follow up with a good polishing compound and finally some polish like Mother's.
#7
Platinum Member
Platinum Member
Thread Starter
Thanks for the input. I think the sandpaper process is going to be required followed by a final buffing. If all fails, there is a local polishing company that can has the right equipment to clean up my efforts
Last edited by BenPerfected; 06-15-2014 at 08:22 PM.