Screws for exhaust tips?
#4
Platinum Member
Platinum Member
iTrader: (6)
I would wait till you get them, they should have bevelled holes in them, buy the ones that the head of the screw best fits the hole, stainless 1 to 1 1/4 inch should be fine, and seal them well
#6
Registered
if holes line up you should definitely thru bolt them. you can get 1/4 20tainless with the beveled Phillips head. since holes are probly 5/15ths for the 1/4 bolts to go thru, they will be a lil big for any Phillips head wood screw. of course you can always paint a dowel with poly resin and shove it into hole and redrill.