Mercury Zero Effort Throttle Wiring
#1
Registered
Thread Starter
Join Date: Sep 2013
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Mercury Zero Effort Throttle Wiring
Hello!
Bought a used Zero Effort control today (single enginge with trim switch) and attached to the shifter its a harness of 5 cables.
Two of them Yellow and Yellow/Red comes from the Shift handle and Red/Blue/Green from the Throttle Handle
Im gonna replace my ultraflex handle with a addon trimswitch from Rex marine.
What cables do i need and where to connect them?
Thanks
David
Bought a used Zero Effort control today (single enginge with trim switch) and attached to the shifter its a harness of 5 cables.
Two of them Yellow and Yellow/Red comes from the Shift handle and Red/Blue/Green from the Throttle Handle
Im gonna replace my ultraflex handle with a addon trimswitch from Rex marine.
What cables do i need and where to connect them?
Thanks
David
#3
Charter Member # 55
Charter Member
Red=power to trim switch
Green= down trim
Blue=up trim
Yellow and Red/Yellow are for neutral safety switch.
Just put male bullet connectors on all of them and then female bullet connectors on the wires they connect to.
Green= down trim
Blue=up trim
Yellow and Red/Yellow are for neutral safety switch.
Just put male bullet connectors on all of them and then female bullet connectors on the wires they connect to.