Mercrusier 350mag w/Bravo 1
#1
Registered
Thread Starter
Join Date: Jul 2014
Location: Maryland
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Mercrusier 350mag w/Bravo 1
Just bought a used Scarab twin 350mags. boats in great shape but doesn't have any manuel with it. Just wanted some technical advise on routine maintenance and things to look out for.
Thanks
Thanks
#2
Registered
VIP Member
Join Date: Jan 2007
Location: Sweet Home, North Alabama and Orange Beach
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Change oil every 25 to 50 hrs. change drive lube every season/100hrs. Change fuel water seps every season. Change impeller every season. Should be as reliable as possible.
#3
Registered
Thread Starter
Join Date: Jul 2014
Location: Maryland
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
great thanks for the info.
one other question; what range in temperature should i expect the motors to run at?? i know this relies heavily on the accuracy of the gauge but for information purposes lets say the gauges are accurate.
one other question; what range in temperature should i expect the motors to run at?? i know this relies heavily on the accuracy of the gauge but for information purposes lets say the gauges are accurate.
#5
Registered
Thread Starter
Join Date: Jul 2014
Location: Maryland
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
awesome thanks for the info. reason for asking is i have twins in my scarab and starboard heats right up in about 5-8min after cold start. the other (port) takes quite a while when idling to reach temp. it will finally get there after cruising for about 10min or so. slow tstat on the port motor??
Last edited by mmr1229; 07-14-2014 at 04:12 PM.
#7
Make sure you use the correct thermostat. I believe there is a rivet (stainless) inside the thermostat perimeter for passing current through the housing so the ECT signal works correctly.