Oil pump thread
#1
Oil pump thread
Theres standard pressure
High pressure.
high volume,
high volume, high pressure
What would a fellow want that has spring oilers (16) .040 orifices stealing about 15 psi of pressure and volume?
decisions decisions
http://www.melling.com/Aftermarket/H...inum-Oil-Pumps
High pressure.
high volume,
high volume, high pressure
What would a fellow want that has spring oilers (16) .040 orifices stealing about 15 psi of pressure and volume?
decisions decisions
http://www.melling.com/Aftermarket/H...inum-Oil-Pumps
#5
Platinum Member
Platinum Member
Along with spring ollers I also have piston oilers, so I run Titan pumps. They are adjustable to whatever pressure and volume you require.
#7
Gold Member
Gold Member
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
This is what we do to mine also, I have 75psi cold idle, 40 psi hot, I am a fan of good pressure and volume, one set of engines I did years ago I had standard volume and pressure, wiped mains in both in 3 hours.... after redoing with HV and shimmed pumps I never had an issue again.
#8
Registered
Join Date: Jun 2013
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
How about the billet aluminum pumps? I really like them. I think I would want high volume with spring oilers.
#10
Registered
Join Date: May 2014
Location: rapid city, sd
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone tried the CVR OPS45? I like the idea of the adjustable pressure, even though I'm not sure how your supposed to adjust it.. What kind of pressure are you seeing with the 10778 in a big block? I've got a 14qt pan so I'm not worried about sucking it dry. Ide like good pressure and volume though because I plan to run hard!