hi perf merc efi; ever used in a motor vehicle? OEM?
#1
Registered
Thread Starter
hi perf merc efi; ever used in a motor vehicle? OEM?
ok so the 310 hp L29 is essentially a truck system. were the 385 mag or 500-525 efi's used on any vehicle with tires instead of a keel?
#2
Registered
no
#3
Registered
iTrader: (2)
Only by the off road crowd looking to be rid of float bowls in big inch crawlers. The 496 intakes appear to be converted truck units , the 7.4 vortec truck intakes i believe are cast from other metals and the rectangular port mag intake might of found a home if they reserected the 70 chevelle . But it would of looked funny.
and the 525 efi asm unit might have clearance issues in a car. But would have looked sweet
and the 525 efi asm unit might have clearance issues in a car. But would have looked sweet
#6
Registered
Thread Starter
i am looking at this 75 vette. 350 q-jet. only thing interesting in the engine compartment is the air filter seals to the bottom of hood scoop. 290 hp smog engine. BORING!!! be interesting to open hood and have people say "nice setup. where the hell it come from?" i dunno if it would fit though.
#7
i am looking at this 75 vette. 350 q-jet. only thing interesting in the engine compartment is the air filter seals to the bottom of hood scoop. 290 hp smog engine. BORING!!! be interesting to open hood and have people say "nice setup. where the hell it come from?" i dunno if it would fit though.
#8
Registered
iTrader: (1)
No as far as big blocks, but this is probably the closest bbc efi (not motor) configuration:
Last edited by SB; 06-29-2015 at 08:07 AM.
#9
Registered
Thread Starter
Looks like the 385 mag intake might fit under a vette hood. That ZL 1 never will... and yes i guess it is a 190 hp. Tamest vette since the 54 blue flame six.
#10
Registered
iTrader: (2)
A vortec 383 with the early mag intake (mpi but with a carb flange a throttle body attaches to) with a proper 6000 rpm cam and head mods ,would be responsive reliable and easy to maintain. Homeless guy under the bridge could put together a turbo 350 or 700r4 to put behind it . Wouldnt be terribly expensive and would make quite a sleeper. I wouldnt want anything to do with a 73 up big block c3 personally