Cause of lifted ring lands on pro charger motor
#1
Registered
Thread Starter
Join Date: Jun 2015
Location: South Central PA
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Cause of lifted ring lands on pro charger motor
As it says , what could be some causes of lifted ring lands on a procharger motor ? This was a fuel injected motor
#2
Registered
Join Date: Sep 2001
Location: Houston, TX, USA
Posts: 2,287
Likes: 0
Received 0 Likes
on
0 Posts
Detonation.
Detonation is caused by too much timing, engine to warm/hot, too much boost, lean afr, and octane of fuel.
Give us more details and we can figure out why.
I learned back in the late 70,s what detonation was when I blew a hole in a piston with a 850 HP gale banks twin turbo setup.
Detonation is caused by too much timing, engine to warm/hot, too much boost, lean afr, and octane of fuel.
Give us more details and we can figure out why.
I learned back in the late 70,s what detonation was when I blew a hole in a piston with a 850 HP gale banks twin turbo setup.