Myco Tongue jack replacement
#1
Registered
Thread Starter
Myco Tongue jack replacement
hey has any ever replaced there tongue jack on a older Myco, (94) its been giving me troubles and now seems to be done, can u call Myco and get the guts, or anyone else? or will I need to get it cut off and a new one welded?
#2
Registered
Join Date: Dec 2010
Location: Port Deposit Md
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Not sure who the manufacturer is of your jack. But Eastern Marine in Deleware had a replacement center post for mine that had rusted out at the bottom foot plate.
www.easternmarine.com
Go-Fast or stay on the dock.
www.easternmarine.com
Go-Fast or stay on the dock.
#4
Registered
I just ordered $700 in parts from Myco. They were responsive & helpful.
http://mycotrailers.weebly.com/parts.html
Something generic like a jack i would think can be found cheaper from a retailer though.
http://mycotrailers.weebly.com/parts.html
Something generic like a jack i would think can be found cheaper from a retailer though.
#5
Registered
My 94 Myco tongue jack was made by Atwood
#6
Registered
Thread Starter
Thanks guys, talked to myco, helpful yes but they don't carry the round style anymore, but he pointed me in a direction just gotta find the same diameter, and should go right in, will shop around n c
#7
Registered
I found that out as well.. it took a lot of digging to find parts for my jack. I think I called Atwood and it took them a bit of digging to get me part numbers but once I got those it ended up being www.appliancezone.com of all places that had them (weird right?!). I REALLY want new fenders one side of mine is the new style and the other is the longer older style which I like much better. Myco doesn't make them anymore so mine are mismatched (trailer was in accident). Keep that in mind also if you ever need them replaced.
#9
Registered
Thread Starter
well just got back from trailer place, $40 for a new jack, 5 minutes of drilling a rivet, all together now, works good, will see when i put boat on it, i feel the top gears when cranking, not sure on where im gonna find them, might just lob off the whole oem handle and re rivet the new one on thanks again everyone