cong95

I'm still kicking some other ideas around. However, it's starting to look more and more like I'm going to yank the engine and do a complete rebuild. If I do indeed go this route, I will be replacing/checking quite a few parts (e.g. fuel injectors, exhaust, ecm tune). With that being said, I'm not wanting to go real radical. At this point reliability sounds a little better to me as I pretty much missed the entire boating season this year!!! Anyone have any suggestions??? Any help and opinions would be greatly appreciated.

Thanks in advance.

Eliminated572

Give Ryan a call at Retter Engine Development. Probably not too far away from you depending on your exact location.... (309) 723-1072

mike tkach

iTrader: (3)

i use borowski race in rockdale illinois.not the cheepest place but they have the best equipment money can buy and they know how to use it.815 725 2727..tell them u got the number from me.

Kat Krazy

Beachy Machine Shop  
Auto Parts Store
Address: 175 E North St, Kokomo, IN 46901
Phone765) 452-9051

Cole2534

iTrader: (1)

I'd not hesitate to use either. Both Ryan and Mike are helpful members here with strong setups.

cong95

Haven't made up mind just yet, but I did speak with Ryan (RED) and I'll be honest he was very intuitive, helpful and personable! Not to mention his ideas and estimates where pretty exciting. Thanks everyone for the input!!!

BUP

iTrader: (9)

maybe too far north but pricing is good to they have really good rep to and I know someone who uses them.

http://torvinensmachine.com/home/services/

BUP

iTrader: (9)

I will also agree with Mike about Borowski as I did not see his post at first.

And if Michigan is not too far north, I would cart all of my stuff right to Dart. You would be surprised what they can do for you.

FIXX

iTrader: (2)

dont know if your near indy..i saw you live in IN.....http://www.steveschmidtracing.com/

they also have state of the art equipment..we have bought a couple complete drag motors from them that we sprayed the chit out of and they lived..

Knot 4 Me

We have a Cig running around our local pond with Ryan's mills in it. Sounds healthy and haven't seen it being towed yet!