Go Back  Offshoreonly.com > Technical > General Q & A
Engine rebuilders in the Chesapeake region. >

Engine rebuilders in the Chesapeake region.

Notices

Engine rebuilders in the Chesapeake region.

Old 10-06-2015, 08:23 AM
  #1  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Port Deposit Md
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Default Engine rebuilders in the Chesapeake region.

I have 500 EFIs with over 500 hours on them. I am looking for recommendations for local engine builders that someone has used and had either good or bad dealings with. Yes bad dealings so I know to stay away from and good results to maybe check them out further. I can pull the engines to maybe help out thier shops schedule.
fordf350 is offline  
Old 10-06-2015, 09:35 AM
  #2  
Registered
iTrader: (2)
 
Join Date: Aug 2011
Location: bel air, md
Posts: 2,733
Likes: 0
Received 5 Likes on 5 Posts
Default

Call Tony @ CMS 410 335 2226 try calling early in the morning. Otherwise leave a message and he will call you back. He's very good a little slow on return time but he's honest about time frame. In the end you will be happy.
Black Baja is offline  
Old 10-06-2015, 11:31 AM
  #3  
Registered
iTrader: (3)
 
Join Date: Jul 2004
Location: chicago
Posts: 11,332
Received 71 Likes on 39 Posts
Default

Mark Rinda at MER performance is out that way
MILD THUNDER is offline  
Old 10-06-2015, 11:54 AM
  #4  
Registered
iTrader: (2)
 
Join Date: Aug 2011
Location: bel air, md
Posts: 2,733
Likes: 0
Received 5 Likes on 5 Posts
Default

Originally Posted by MILD THUNDER
Mark Rinda at MER performance is out that way
If you consider 8 hours drive out that way.
Black Baja is offline  
Old 10-06-2015, 12:06 PM
  #5  
dcb
Registered
Platinum Member
 
Join Date: Aug 2007
Location: Falmouth, Va/ PGI, Fl
Posts: 448
Received 3 Likes on 2 Posts
Default

Dont forget Dave at MDG.
dcb is offline  
Old 10-06-2015, 01:59 PM
  #6  
Airking
VIP Member
 
Boater8987's Avatar
 
Join Date: Aug 2004
Location: Stafford Va.
Posts: 452
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by dcb
Dont forget Dave at MDG.
+1 = Good at 410-956-5381

Last edited by Boater8987; 10-06-2015 at 02:02 PM.
Boater8987 is offline  
Old 10-06-2015, 07:05 PM
  #7  
Registered
iTrader: (1)
 
Join Date: Aug 2013
Location: Newark, DE
Posts: 621
Likes: 0
Received 0 Likes on 0 Posts
Default

+2 for Tony at CMS Racing, he did the motor in mine
ealesh33 is offline  
Old 10-07-2015, 08:20 AM
  #8  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Port Deposit Md
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Default

Going to check out each one of them thanks guys
fordf350 is offline  
Old 10-12-2015, 09:04 PM
  #9  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Port Deposit Md
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok I think I have found a rebuilder. So my next question is do I pressure test the headers and reuse them or buy new ones?
fordf350 is offline  
Old 10-12-2015, 09:25 PM
  #10  
Registered
iTrader: (2)
 
Join Date: Aug 2011
Location: bel air, md
Posts: 2,733
Likes: 0
Received 5 Likes on 5 Posts
Default

Originally Posted by fordf350
Ok I think I have found a rebuilder. So my next question is do I pressure test the headers and reuse them or buy new ones?
What does your rebuilder say?
Black Baja is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.