Cam selection
#1
Registered
Thread Starter
Join Date: Feb 2013
Location: Buffalo New York
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Cam selection
Looking at replacing my hp500 crane 611 cam. I want to replace with another crane. I don't want the high idle or reversion issues like I have with the 611 but don't want to give up any hp. Who does. What would you guys suggest 781 731 791???? What your thoughts? Anyone tried any of these already with good results? Everything is stock carb hp500 with the taller risers
#3
Registered
iTrader: (1)
I thought the later tall risers got rid of the reversion on the HP500 ? They are pretty damn tall.
#4
Registered
Thread Starter
Join Date: Feb 2013
Location: Buffalo New York
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Those are the tails I have and still sucked some water at idle Idle had to be at 800 or better and it helped but seems like a band aid to me Want to use a cam thats not so prone and worrisome at idle but makes the same power any ideas
#6
Registered
#9
Registered
Thread Starter
Join Date: Feb 2013
Location: Buffalo New York
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
i was just looking at the crane catalog and I see 741 does not have the 114 lsa Oddly enough I was waiting to hear back from bob madera on a quote and he call today and is working something up for a cam so will see what he comes up with anyone have a part number for the 525efi cam?