Help: issue with GIL manifolds hitting back of Alt - Gen 4 454
#1
Registered
Thread Starter
iTrader: (2)
Join Date: Feb 2015
Location: North East MD
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Help: issue with GIL manifolds hitting back of Alt - Gen 4 454
I was finishing up assembling the brackets, and exhaust and the cooling elbow hits the back of the alternator. I have the PS/Alt bracket. What have other done? Any pics? Can I space it out and align it with PS and use 1 long belt (dont like that idea).
how do i upload a pic?
how do i upload a pic?
Last edited by 95NovaSpyder; 04-05-2016 at 06:29 PM.
#9
Registered
Thread Starter
iTrader: (2)
Join Date: Feb 2015
Location: North East MD
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
http://www.offshoreonly.com/forums/s...ds-risers.html
I basically have this exhaust - but my end one is a 90* - on port side - i have water inlet to rear due to Alt at front.
mine are the GIL here manifold need 1 - long bolt & 1 short bolt per port
I basically have this exhaust - but my end one is a 90* - on port side - i have water inlet to rear due to Alt at front.
mine are the GIL here manifold need 1 - long bolt & 1 short bolt per port