Need Help finding Power Steering Pulley
#1
Gold Member
Gold Member
Thread Starter
Need Help finding Power Steering Pulley
I've got the old style single V-Belt Power Steering pulley. It is press-on, .750 bore, with an outside diameter of 5.75. The one I ordered from Summit (billet specialties 86420) isn't deep enough. My old one is about 2 1/4 inches deep, but wasn't pressed on the last 3/8's of an inch.
Can anyone sort me out here? I almost ordered this one. https://www.summitracing.com/parts/brg-801105/overview/ but I believe the "depth" is only about 1.75inches.
Any suggestions?
Can anyone sort me out here? I almost ordered this one. https://www.summitracing.com/parts/brg-801105/overview/ but I believe the "depth" is only about 1.75inches.
Any suggestions?
#3
Registered
Join Date: Jan 2004
Location: Saint Petersburg Fl
Posts: 1,571
Likes: 0
Received 0 Likes
on
0 Posts
My SBC (volvo) had surface rust and was eating belts. Tried a couple local autoparts stores and gm dealer and had no luck. Not saying can't be done but counter guys were worthless without a part number. Ended up getting a nos one on eBay.for reasonable.