Anybody know where I can get a 500 EFI Rubber seal for Throttle Postion Sensor?
09-06-2016, 05:46 PM
#1
Gold Member
Gold MemberThread Starter
Anybody know where I can get a 500 EFI Rubber seal for Throttle Postion Sensor?
Changing the TPS on 500EFI and lost the rubber seal. Does anybody know where I can find or get the rubber seal that seals the wire connection in the TPS?
Thanks Gary
Thanks Gary
09-06-2016, 06:59 PM
#2
Registered
iTrader: (1)
Okay, bear with me...your tps looks just like the TPS to the 95 GM 5.7 trucks...connector too.
Connector Pigtail
NAPA ECH EC89
Standard S-619
Dorman 84598
TPS looks like
Connector Pigtail
NAPA ECH EC89
Standard S-619
Dorman 84598
TPS looks like
Last edited by SB; 09-06-2016 at 07:07 PM.
09-06-2016, 07:54 PM
#3
Registered
go to a bone yard and pull one from any gm car/truck.
09-06-2016, 08:01 PM
#4
Registered
iTrader: (1)
See if this is cheaper than the pigtail and if you can't grab a used one like S30mentioned
3-Way Female Metri-Pack Housings, 150 Series, Pull-to-Seat #12065287
3-Way Female Metri-Pack Housings, 150 Series, Pull-to-Seat #12065287
09-06-2016, 09:31 PM
#5
Gold Member
Gold MemberThread Starter
Thanks SB & Sutphen 30! That part number 12065287 sure helped me out. $0.86 each on the website below. 
http://www.terminalsandconnectors.co...oduct/12065287
http://www.terminalsandconnectors.co...oduct/12065287
09-06-2016, 09:54 PM
#6
Registered
iTrader: (1)
$45.00 for shipping, 
If I gave you the wrong part # it is Sutphen30's fault.
If I gave you the wrong part # it is Sutphen30's fault.
