Baja8808

Hi Everyone, I plan on replacing the heads on my 525SC engines with the EQ 320 heads.
I was wondering what everyone was using for intake and inconel exhaust valves?

Thanks in advanced for your opinions.

Black Baja

iTrader: (2)

+100 long. With your bore I wouldn't go any bigger than 2.25 intake. Either Ferrea or REV valves Manley don't flow so well. REV flow the best but Ferrea is a close second. Definitely Inconel exhaust valves.

getrdunn

iTrader: (7)

Heads should work out great for you.

MILD THUNDER

iTrader: (3)

These are the exhaust valves I put in mine.

http://ferrea.carshopinc.com/product...63828/F1261P-8

MILD THUNDER

iTrader: (3)

spec sheet

Rookie

iTrader: (4)

Bore notch the cylinders if you can while the heads are off. I'm partial to my 2.30"

Baja8808

I plan on rebuilding short block to increase compression to 8.5:1. I'll look into bore notching. Thanks.

jdf4068

Looking at these heads too. Thanks for the info guys ,,,from what I read abt them is they r the ones that started pro top line heads in the late 90's. I have a pair of those heads on a 489 like the hell out of them

Baja8808

Mild, For the intake valve, did you use the F1232P valve.