Clay Smith cams???
#2
Registered
I use bullet if its custom and isky or crane for off the shelf.I like getting the double swaps from bullet.
#4
Platinum Member
Platinum Member
iTrader: (6)
#6
Registered
iTrader: (1)
I know that that Bullet keeps the nice Callies cam cores in stock. As far as changing firing orders, you really need no other evidence than the fact GM saw enough of an advantage (albeit likely very incremental ) to change the firing order in their latest gen motors. If you are running a carb, supposedly there is an advantage to be had in fuel distribution.
#7
Registered
Thread Starter
iTrader: (7)
I would like to see what duration they'd put me at with a solid roller. There has been some who have used the 1075sci cam with NA build and claimed good results however I don't have first hand knowledge. Only read it on an old thread here.
Last edited by getrdunn; 10-21-2016 at 03:01 PM.
#8
I cannot comment on their boat cams but I had a custom grind done for my 565 bbc drag race motor and it works really good. Better than the erson custom grind I had before and nice people