engine oil temp sender
#1
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
engine oil temp sender
What are you guys using, I've looked on line and cant seem to find one, I send a message to Livorsi but have not heard back
thanks
thanks
#4
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
thanks, new builds, I don't have one now..........I think the gauges are Autometer but the boats @ the lake
#7
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
Correct EZ............ CP sent me a catalog of the senders for the Autometer gauges
#9
Platinum Member
Platinum Member
Thread Starter
iTrader: (6)
Now all I have to do is drive four hours to see if their half sweep or full sweep, it makes a difference.
thanks Chris
thanks Chris
Last edited by F-2 Speedy; 01-25-2017 at 08:03 AM.
#10
Registered
iTrader: (7)
Anyone have their oil temp sender in an oil pan port. I know some like it before cooler and some who like it after cooler. I always figured if the the sensor was close to the pump you'd actually be getting a pretty accurate reading. Kinda like my water temp sensor I used a T fitting and installed it there. This was a project in the works that never saw the water so I never had a chance to see how either worked but the locations made sense to me. Especially for water temp sensor if your running x-over an bypass.