Hydro- trim pump
03-10-2003, 07:09 AM
#1
Registered
Thread Starter
Join Date: Oct 2002
Location: GUN LAKE MICHIGAN
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Hydro- trim pump
Will the trim pump for the drives work on the K-tabs or are they a differant type pump ? They don't look the same, but the tabs have dual cylinders just like the drive trim. Anyone had any experiance with this? The drives are 1989 TRS, and the tabs are Merc's dual ram large Tabs 1989(keikhafer).
03-10-2003, 07:22 AM
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
They will work fine, just remember that the hi-pressure line on the pump = blue wire = down on the tabs.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
03-11-2003, 07:01 AM
#4
Offshoreonly Advertiser
Offshoreonly Advertiser
You can use just about anything for fluid, the spec has changed over the years. ATF or 10-30 oil is fine.
As far as bleeding, I just run the tabs up & down a few times. I have never done anything to bleed the system, even though it is not a bad idea.
As far as bleeding, I just run the tabs up & down a few times. I have never done anything to bleed the system, even though it is not a bad idea.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Thread
Thread Starter
Forum
Replies
Last Post
zimm17
General Q & A
3
03-13-2007 05:23 PM
ratman
General Boating Discussion
5
01-26-2006 07:48 PM
