Bravo top cap torque?
05-12-2003, 09:31 PM
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: USR, NJ
Posts: 4,000
Likes: 0
Received 0 Likes
on
0 Posts
Bravo top cap torque?
Im in the process of installing an Innovative Marine drive shower. How many pounds of touque should I tighten the top cap bolts back to? Should I use Lock Tite or just thread them in bare?
I also have to replace the back cap with the bracket for my IMCO hydrolic steering. Are these the same torque numbers?
I also have to replace the back cap with the bracket for my IMCO hydrolic steering. Are these the same torque numbers?
05-12-2003, 09:45 PM
#2
Charter Member
Per my Merc service manual:
both top and rear caps, 18-22 ft lbs.
I have never used loctite on them. No problems.
both top and rear caps, 18-22 ft lbs.
I have never used loctite on them. No problems.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
