Go Back  Offshoreonly.com > Technical > General Q & A
Spark Plug gap , AC Delco Rapid Fire 1 >

Spark Plug gap , AC Delco Rapid Fire 1

Notices

Spark Plug gap , AC Delco Rapid Fire 1

Thread Tools
 
Old 05-26-2003, 08:41 AM
  #1  
Registered
Thread Starter
 
Join Date: Sep 2001
Location: Connecticut
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts
Default Spark Plug gap , AC Delco Rapid Fire 1

Does anyone know the correct gap for these spark plugs?
They have the extended tip for better burn.

Motor is a 540 with Thunderbolt 4 ign.

Thanks
sheikman is offline  
Old 05-26-2003, 09:56 AM
  #2  
Charter Member #1171
Charter Member
 
obnoxus's Avatar
 
Join Date: Feb 2001
Location: Clearwater, FL
Posts: 4,019
Received 21 Likes on 16 Posts
Default

.040
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
obnoxus is offline  
Old 05-26-2003, 10:22 AM
  #3  
CESSNA
Guest
 
Posts: n/a
Default

RAPID FIRE AND SPLIT FIRES ARE A RIP OFF <<JUNK ,I had a guy from sterling tell me thursday there like STP for your oil ,But Like
P.T. Barnum(of circus fame) said there is a sucker born every min

But hey run them I'm not slaming anyone for their beliefs I do stupid stuff too !
 
Old 05-27-2003, 07:37 AM
  #4  
sheikman1
Guest
 
Posts: n/a
Default AC Delco

I can appreciate your concern Cessna but if you compare NGK, AC plugs, Champion Plugs you will see that the Rapid Fire Junk reaches furthur into the combustion chamber hence better chance of not fouling at low speeds.
 
Old 05-27-2003, 05:20 PM
  #5  
bobby daniels
Guest
 
Posts: n/a
Default

Most plugs are avalibile in extended tip -
Just for chits and giggles today I compare a rapid fire and a extended tip plug and they were either the same or the autolites were longer ,just my 1 cent worth

and they make tips for oil burners that schroud the tip (hide it ) from the oil and ect in the cylinder not put it out in it ,go with a MSD box and regular plugs you'll think you had your motor rebuilt
 
Old 05-27-2003, 06:46 PM
  #6  
Platinum Member
Platinum Member
 
26sonic's Avatar
 
Join Date: Feb 2001
Location: poughkeepsie, ny, usa
Posts: 1,198
Likes: 0
Received 0 Likes on 0 Posts
Default

bobby daniels with the msd ignition on a 502efi what would you gap the plugs at ? using either ac delco or ngk standard length plug?
26sonic is offline  
Old 05-27-2003, 09:21 PM
  #7  
bobby daniels
Guest
 
Posts: n/a
Default

Stay with 40 on the plugs ,it (the msd) really helps idle ect and ect. use one of their e type coils or the blaster 2
 
Old 05-28-2003, 06:01 AM
  #8  
sheikman1
Guest
 
Posts: n/a
Default MSD Box

Bobby,

Good point on the MSD box.
Can I hook the MSD into the Thund IV ignition ? and how do I wire this up.

2nd question... I was told that Autolite plugs were a good choice for my motor but was never able to figure out which one.
Any help here

RJ
 
Old 05-28-2003, 07:00 AM
  #9  
Gold Member
Gold Member
iTrader: (2)
 
Pwrbt33's Avatar
 
Join Date: Jan 2001
Location: Brooklyn Park, Md USA
Posts: 2,123
Likes: 0
Received 1 Like on 1 Post
Talking still running I sea !!!

sheikman1,
I see the motor is running good. Great to hear. So how does the boat like the 540 ?

Pwrbt33
Pwrbt33 is offline  
Old 05-28-2003, 10:39 AM
  #10  
bobby daniels
Guest
 
Posts: n/a
Default Re: MSD Box

Originally posted by sheikman1
Bobby,

Good point on the MSD box.
Can I hook the MSD into the Thund IV ignition ? and how do I wire this up.

2nd question... I was told that Autolite plugs were a good choice for my motor but was never able to figure out which one.
Any help here

RJ
P.M. your head type and comp.ratio,and cam and I'll be happy to help with plugs ,,,autolite work fine I can get the number with info

shop for a MSD 6al box jegs or summit ,but shop ,hope you do it it will help
 


Quick Reply: Spark Plug gap , AC Delco Rapid Fire 1


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.