depth gauge works 1 min. goes to 1.5 and stays there?
06-13-2003, 09:32 AM
#1
Registered
Thread Starter
Join Date: Jun 2002
Location: waterford,mi
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
depth gauge works 1 min. goes to 1.5 and stays there?
The puck broke loose last year, I fixed that and it was ok.
Its still intact.
This year it works when you start the boat or turn the key
on. For about 1 minute. Then goes to 1.5. Sometimes
it will cycle through numbers if I hit an arrow. Then back
to 1.5. The manual was no help.
I think we all have problems we these eventually.
Thanks, JC
Its still intact.
This year it works when you start the boat or turn the key
on. For about 1 minute. Then goes to 1.5. Sometimes
it will cycle through numbers if I hit an arrow. Then back
to 1.5. The manual was no help.
I think we all have problems we these eventually.
Thanks, JC
