Carb Base Gaskets
08-28-2003, 06:50 PM
#1
Registered
Thread Starter
Join Date: Jul 2001
Location: SW Ohio
Posts: 770
Likes: 0
Received 0 Likes
on
0 Posts
Carb Base Gaskets
Curious....When do you use a open base gasket and when do you use a 4-hole gasket? Also have always noticed that the gaskets I use (Mr.Gasket) have a number printed on one side and the outher side has a very slight film (I think) on it and the MR. Gasket logo all over it...It dosnt' make a difference "which side is up" does it? Thanks guys sorry about the simple questions.....
BH
BH
08-28-2003, 07:07 PM
#2
use the four hole gasket on a four hole intake.
open gasket on a open plenum intake.
don't know about the film, should still seal either way.
I use felpro gaskets and they are the same both sides.
open gasket on a open plenum intake.
don't know about the film, should still seal either way.
I use felpro gaskets and they are the same both sides.
