Bravo vs Alpha Gen2 drive heights
#1
VIP Member
Platinum Member
Thread Starter
Bravo vs Alpha Gen2 drive heights
I wondering about this in a Alpha gen2 to Bravo swap
were 1st generation Alpha's shorter?
x dim issues ?
were 1st generation Alpha's shorter?
x dim issues ?
#2
Platinum Member
Platinum Member
I have heard that the propshaft -to- crankshaft dimension on All alpha and All Bravo drives are identical, but that Bravos are usually mounted 1 to 1.5 inches higher than Alphas by most manufacturers for some reason.
#3
speel chekk this fokker!
Charter Member
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
the alpha is atad shorter than athe bravo we're talking like 1/8" here so its nothing to be overly concerned about.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#4
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mcollinstn
I have heard that the propshaft -to- crankshaft dimension on All alpha and All Bravo drives are identical.
I have heard that the propshaft -to- crankshaft dimension on All alpha and All Bravo drives are identical.
Yea, what he said.
#5
Charter Member
Charter Member
We need someone to create a chart or list of all the drives heights in comparison to eachother, it would be very usefull information.
Bravo & Alpha = std
TRS = 1" deeper
SSM 2 = 2" deeper
SSM 3 = 1" deeper
SSM 4 = ? shorter
SSM 5 = same as SSM4
SSM 6 = ? shorter
Blackhawk =? shorter
Volvo =?
Volvo DPX =?
Can someone fill in the ?'s Chris
Bravo & Alpha = std
TRS = 1" deeper
SSM 2 = 2" deeper
SSM 3 = 1" deeper
SSM 4 = ? shorter
SSM 5 = same as SSM4
SSM 6 = ? shorter
Blackhawk =? shorter
Volvo =?
Volvo DPX =?
Can someone fill in the ?'s Chris