SMYTH1

i have red vinylseats with mold stains .i tried simple green didn't work that well.any suggestions?

Fountainclimber

I have seen people scrubbing their seats with Barbasol shaving cream. I don't know the chemical rational behind this but it seems to work.

Hope it works!

F

Big Dawg

Use the same stuff you use in the shower to get mold off the walls it works great
get the stuff with bleech it wont ruin your color.

Quiet Storm

My son was using Scrubbing Bubbles Mildew stain remover on my vinyl to remove mildew. (I got this on my hatch cover when I had it at Milo for sale ) Thats another story but the first thing I did was grab the bottle to see if it was safe for vinyl. It said it was safe and it cleaned life you wouldn't believe. We did rinse it off with water but it cleaned great.

BajaBuddy

I had some really bad mildew on my engine cover last spring because of a leaking cover over the winter. My wife bought some mildew remover at a RV shop that really worked well. Can't remember the brand but they sell lots of this kind of thing there.

BigSilverCat

we had major mold on the bluewater and we used wd-40 it worked better then anything else we tried.

SMYTH1

thanks for the tips.i'll try anything not to have to go to the upolstry guy

Ratchet

Try this..........I used it a couple of years ago (let it soak in & scrubbed it a but w/ a small brush)

2 years later, never came back - it's a good general purpose cleaner). It's called spray nine

http://www.westmarine.com/webapp/wcs...roductId=72444

JPD Motorsports

Tilex or the stuff from home depot ZEP mildew remover these things work great.

formula31

Spray nine is pretty good stuff. Dont leave it sit on white gelcoat or it will turn yelllow for a bit.