BRAVO-ONE LABBED BY Houston Prop
01-08-2004, 08:48 PM
#6
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
STEELWARE
hello Jeff,we can do what ever you want.
if you say polish the prop,it will look as good as the one in the post ABOVE.
or, we can paint the prop
To match your new outdrive
if you say polish the prop,it will look as good as the one in the post ABOVE.
or, we can paint the prop
To match your new outdrive
Last edited by HOUSTONPROP; 01-14-2004 at 12:03 AM.
01-09-2004, 08:38 PM
#7
Platinum Member
Platinum Member
Join Date: Apr 2002
Location: Houston-Austin, TX
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Those Bravo One's are mine! I picked them up today. Great service, Great job. I can't wait to try them out, just need a little warmer weather!
VIP Member
01-11-2004, 01:03 AM
#10
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
How many rpms and mph could be expected out a lab job? Do you thin the blades and blue print them, balance the prop?
I have out of the box 26 B1's on 1.3 Bmaxs turning out, motors turn 5100/90mph, would like 5500/95mph.
Conventional V...heavy boat.
Or would you also have to bend them back to 25 or so?
I have out of the box 26 B1's on 1.3 Bmaxs turning out, motors turn 5100/90mph, would like 5500/95mph.
Conventional V...heavy boat.
Or would you also have to bend them back to 25 or so?
Last edited by Back4More; 01-11-2004 at 01:06 AM.
