Valve Cover Breather Hose
#1
Registered
Thread Starter
Join Date: Jan 2001
Location: Topeka, KS USA
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Valve Cover Breather Hose
Does anyone know what the internal diameter of the hose that comes off a typical BBC valve cover breather is? This is the hose that runs from the breather to the flame arrestor. Help . . .
#8
hehe just went out into the snowstorm and measured mine, they are 1/2". from 7.4 valve covers, little plastic elbows. If somebody has 3/4, they probably have too much blow-by.
#9
Originally posted by formula31
hehe just went out into the snowstorm and measured mine, they are 1/2".
hehe just went out into the snowstorm and measured mine, they are 1/2".
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 02-05-2004 at 09:31 PM.
#10
Registered
Thread Starter
Join Date: Jan 2001
Location: Topeka, KS USA
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I think 1/2 is the score . . . and thanks for the effort in the snowstorm. Does anyone have a clue where a guy could get some of that nifty stainless steel looking hose (or hose sleeve) and ends to make the breather hoses look sano? I am running out of things to occupy my mind as I slosh through the snow in my one horse open sleigh . . .