500 cam #
#1
Registered
Platinum Member
Thread Starter
iTrader: (1)
Join Date: Sep 2003
Location: Fort Erie Ontario Canada
Posts: 521
Likes: 0
Received 1 Like
on
1 Post
500 cam #
Does anyboby have the crane part # for 96, 500 carberated, cannot find # on old cam, and crane can't help me or doesn"t want to, to protect., merc.? trying to buy from crane rather than merc.
thanks Joe
thanks Joe
#2
Guest
Posts: n/a
It's in the new March 2004 issue of POWERBOAT in Bob Teague's column.
HP 500 carb
Gen V = 139611 (This will not come up on Crane's website, so it may be a misprint.)
Gen VI (hyd roller) = 169611 (.576"/.598"; 222/230 deg; 110 LSA)
HP500 EFI:
169621 (.598"/.610"; 230/236 deg; 114 LSA)
He also lists #169731 as a nice upgrade to the EFI cam. I think this is a misprint and should be #168731.
Check out pgs 20 - 22 of the magazine. It may be helpful to you if you are rebuilding.
HP 500 carb
Gen V = 139611 (This will not come up on Crane's website, so it may be a misprint.)
Gen VI (hyd roller) = 169611 (.576"/.598"; 222/230 deg; 110 LSA)
HP500 EFI:
169621 (.598"/.610"; 230/236 deg; 114 LSA)
He also lists #169731 as a nice upgrade to the EFI cam. I think this is a misprint and should be #168731.
Check out pgs 20 - 22 of the magazine. It may be helpful to you if you are rebuilding.