These valves OK w/supercharger?
#1
These valves OK w/supercharger?
Are these valves good enough to use with superchargers? Exhaust aren't inconnel. But they are a good price and 2 sets are available. Reliability is far more important than saving money. I want these motors bullet proof.
454 CHEVY RACE VALVES 1.88 2.190 - NEW - 16
SquareTrade © AP6.0
BRAND NEW.
GENUINE REV RACE SERIES SWIRL POLISHED 7500 RPM RATED VALVES. 8 EXH. AND 8 INT.
EXH. ARE 1.88" HEAD DIAMETER, 5.23" STOCK LENGTH, 3/8" STEM.
INTAKES ARE 2.190" HEAD DIAMETER. 5.35" LENGTH AND 3/8" STEM. 1-GROOVE
EXH. VALVES ARE 21-2N STAINLESS OFFERING HIGH TEMP. AND HIGH RPM RESISTANCE. TIPS ARE HARDENED. VALVE IS 1-PIECE.
INTAKES ARE SPECIAL HIGH-TEMP RESISTANT 422 MATERIAL. A SPECIAL STAINLESS ALLOY RESISTANT TO VERY HIGH TEMPERATURES.
ALL 16 VALVES ARE POWER FORGED, AND COMBINED WHOLESALE COST OF $175.00.
PART NUMBERS ARE PR5009 AND PR5008.
454 CHEVY RACE VALVES 1.88 2.190 - NEW - 16
SquareTrade © AP6.0
BRAND NEW.
GENUINE REV RACE SERIES SWIRL POLISHED 7500 RPM RATED VALVES. 8 EXH. AND 8 INT.
EXH. ARE 1.88" HEAD DIAMETER, 5.23" STOCK LENGTH, 3/8" STEM.
INTAKES ARE 2.190" HEAD DIAMETER. 5.35" LENGTH AND 3/8" STEM. 1-GROOVE
EXH. VALVES ARE 21-2N STAINLESS OFFERING HIGH TEMP. AND HIGH RPM RESISTANCE. TIPS ARE HARDENED. VALVE IS 1-PIECE.
INTAKES ARE SPECIAL HIGH-TEMP RESISTANT 422 MATERIAL. A SPECIAL STAINLESS ALLOY RESISTANT TO VERY HIGH TEMPERATURES.
ALL 16 VALVES ARE POWER FORGED, AND COMBINED WHOLESALE COST OF $175.00.
PART NUMBERS ARE PR5009 AND PR5008.
__________________
[img][/img]
[img][/img]
#3
Registered
Join Date: Dec 2003
Location: Los Angeles California
Posts: 8,306
Likes: 0
Received 2 Likes
on
2 Posts
Stainless will work if the boost is modest... but the grind has to be right.... or the exhaust will "tulip"... Inconel are the best... What is the brand? Manley? I had Manley stainless exhaust in my engines... they worked well... but I was only running 5 lbs boost.. and rich mixture too. The jack-a** that originally did the valve grind did such a lousy job one of the valves tuliped... after the valves were reground .... no problems.
#4
Charter Member # 55
Charter Member
Your key word in your post is "I want these motors bulletproof"
Go with Manley Severe Duty Intake valves and Manley Extreme Duty Exhaust valves. Extreme Duty are inconnel.
Extreme Duty valves are about $350 per set of 8.
Go with Manley Severe Duty Intake valves and Manley Extreme Duty Exhaust valves. Extreme Duty are inconnel.
Extreme Duty valves are about $350 per set of 8.
#6
Registered
Join Date: Dec 2003
Location: Los Angeles California
Posts: 8,306
Likes: 0
Received 2 Likes
on
2 Posts
Originally posted by Griff
Your key word in your post is "I want these motors bulletproof"
Go with Manley Severe Duty Intake valves and Manley Extreme Duty Exhaust valves. Extreme Duty are inconnel.
Extreme Duty valves are about $350 per set of 8.
Your key word in your post is "I want these motors bulletproof"
Go with Manley Severe Duty Intake valves and Manley Extreme Duty Exhaust valves. Extreme Duty are inconnel.
Extreme Duty valves are about $350 per set of 8.