water pressure fix?
#1
Platinum Member
Platinum Member
Thread Starter
iTrader: (5)
Join Date: May 2001
Location: NO WHERE
Posts: 3,358
Likes: 0
Received 0 Likes
on
0 Posts
water pressure fix?
installed new exhaust manifolds (rev marine) water pressure went from 18 to 30 wot. if i remove 1 of the 1/2inch pipe plugs on each manifold and install some sort of adjustable valve with it dumping overboard would it lower the pressure to be safe.
#2
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
The pressure rose because the exaust is restrictive. It would be best to try to find the restriction and remove it. Anyways, I have a single 1/2" dump valve and it works great on my app.
#4
Registered
Join Date: Jul 2001
Location: Tinley Park, IL
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
I'd call the manufacturer and ask them why the tail pipe is causing a restriction. It might be as easy as opening up the water dump hole into the tailpipe. If you have to go with a pressure relief valve Merc makes one. http://www.offshoreonly.com/forums/s...water+pressure
Wett Vett on the board has one also.
Dan
Wett Vett on the board has one also.
Dan
#5
32' SUNSATION
Platinum Member
Join Date: Feb 2001
Location: MA
Posts: 1,143
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by candyman35
I'd call the manufacturer and ask them why the tail pipe is causing a restriction. It might be as easy as opening up the water dump hole into the tailpipe. If you have to go with a pressure relief valve Merc makes one. http://www.offshoreonly.com/forums/s...water+pressure
Wett Vett on the board has one also.
Dan
I'd call the manufacturer and ask them why the tail pipe is causing a restriction. It might be as easy as opening up the water dump hole into the tailpipe. If you have to go with a pressure relief valve Merc makes one. http://www.offshoreonly.com/forums/s...water+pressure
Wett Vett on the board has one also.
Dan
#6
Platinum Member
Platinum Member
Thread Starter
iTrader: (5)
Join Date: May 2001
Location: NO WHERE
Posts: 3,358
Likes: 0
Received 0 Likes
on
0 Posts
this happened after i installed the manifolds, they keep saying i must have did something wrong .yes i have thought about the merc valve but i want mine back to around 15-18p.s.i w.o.t.
Thread
Thread Starter
Forum
Replies
Last Post
Zanie
General Q & A
5
03-10-2005 10:58 AM
28Eliminator
General Q & A
11
06-22-2004 10:43 PM