Go Back  Offshoreonly.com > Technical > General Q & A
Hynautic steering by Teleflex??? >

Hynautic steering by Teleflex???

Notices

Hynautic steering by Teleflex???

Thread Tools
 
Old 03-17-2004, 10:14 AM
  #1  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default Hynautic steering by Teleflex???

I was on the "other" site and some people were talking about a hydraulic helm by teleflex whats the story with them? are they better than the stock cable crap most people have? Could you upgrade an existing cable setup with this and be better off? When steering fails what usually breaks? the cables? Hey my boats a 93 and the steering needs some help but don't have the scratch to add a full hydraulic set up would this fit the bill??? I see that they call it SeaStar now but you can buy it for $750....
__________________
If your boat has a sail do you ride a horse to the ramp?

Last edited by dyno; 03-17-2004 at 10:19 AM.
dyno is offline  
Old 03-17-2004, 10:26 AM
  #2  
Registered
 
birdog's Avatar
 
Join Date: Jan 2002
Location: Batavia Oh.
Posts: 4,035
Likes: 0
Received 4 Likes on 2 Posts
Default

I had the Helm unit fail on mine.Lost all steering coming into PIB after runninh hard in 4-5s !!....No question after that...I will NEVER be without full Hyd. again !!!
birdog is offline  
Old 03-17-2004, 10:30 AM
  #3  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default

Originally posted by birdog
I had the Helm unit fail on mine.Lost all steering coming into PIB after runninh hard in 4-5s !!....No question after that...I will NEVER be without full Hyd. again !!!
are you talking about this set-up failing???
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Old 03-17-2004, 10:33 AM
  #4  
Registered
 
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes on 0 Posts
Default

"Hynautic by Teleflex"? Didn't know that Hynautic was associated with teleflex.
Most of the teleflex stuff is for OB.
Most hynautic is for OB or inboard. I did have a Hynautic system (non power assisted) on my 38 Scarab. Very good quality but none of the chrome, polished stuff you see on Latham etc.
Their external cylinders were very strong, 7/8" S/S rod if I remember correctly. Again not shiney but they would be my first choice for external hydraulic.
I later changed out the manual to a power assist Charlyn unit. Worked great.
Gary
Gary Anderson is offline  
Old 03-17-2004, 10:34 AM
  #5  
Official OSO boat whore
Charter Member
iTrader: (2)
 
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes on 0 Posts
Default

I would add a hydraulic ram using your existing cable setup. It will eliminate most of the slop that is present in the steering mechanism. The only slop that will remain will be in the cable and helm.
Cord is offline  
Old 03-17-2004, 10:50 AM
  #6  
Registered
 
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes on 0 Posts
Default

My bad, looks like Teleflex, Morse, and Hynautic are all one company now.
BTW, dyno, are you planning on external or internal hydraulic steering? What's the application? Single or twin bravo?
Gary
Gary Anderson is offline  
Old 03-17-2004, 10:59 AM
  #7  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default

Twin Bravo....If I can get away with an internal set-up that would fill my needs much cheaper I'd go that route..
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Old 03-17-2004, 11:06 AM
  #8  
Official OSO boat whore
Charter Member
iTrader: (2)
 
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes on 0 Posts
Default

Gary-I think they merged about 2 years ago.

Dyno-It'll still cost you a couple of k, but there is a twin ram imco setup for sale on the board. I spent 4k for my single drive twin ram setup and this one was significatly less.
Cord is offline  
Old 03-17-2004, 11:15 AM
  #9  
Registered
 
birdog's Avatar
 
Join Date: Jan 2002
Location: Batavia Oh.
Posts: 4,035
Likes: 0
Received 4 Likes on 2 Posts
Default

No Dyno....I had the Add on System,Like Cord mentioned.I dont know about the Hynautic...Just DONT do the Add On !!!!....PM Allen4 about Xs systems...
After my failure & near VERY bad experience with Add on systems I am VERY nervous about anything but FULL Hyd.....
birdog is offline  
Old 03-17-2004, 11:18 AM
  #10  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default

Cord the seastar is $750 it replaces the cables and helm only you need to buy the lines also looks like another $150
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  


Quick Reply: Hynautic steering by Teleflex???


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.